PhoneStar is a revolutionary soundproofing board, made of a combination of sand and cardboard. Designed to reduce both impact and airborne sound, while adding thermal mass to structures.
The decoupling fleece acts as a decoupling layer between PhoneStar boards and the structural floor, separating the two hard surfaces.
| Mid-floor construction | Acoustic Build Up | Acoustic Build Up Height |
Floor Covering | IIC | STC | Ln,w | Rw | Notes |
| 126mm CLT no ceiling |
5mm Plywood |
22mm |
N/A | 44 | 40 | 66 (0) | 40 (0 ; -3) | |
| 126mm CLT no ceiling |
Phonestar Tri x2 layers 5mm Plywood |
37mm |
N/A | 47 | 42 | 63 (0) | 42 (0 ; -3) | |
| 126mm CLT no ceiling |
Phonestar Tri x2 layers 5mm Plywood |
37mm |
5mm Native Vinyl | 48 | 44 | 62 (0) | 44 (-1 ; -4) | |
| 126mm CLT no ceiling |
GenieMat FF17 18mm Plywood |
50mm |
N/A | 42 | 45 | 67 (1) | 45 (-2 ; -7) | |
| 126mm CLT no ceiling |
GenieMat FF17 Phonestar Tri x2 layers 5mm Plywood |
65mm |
N/A | 42 | 47 | 64 (1) | 47 (-2 ; -7) | |
| 126mm CLT no ceiling |
20mm Wolf Miwo 18mm Plywood |
53mm |
N/A | 43 | 48 | 64 (1) | 48 (-2 ; -8) | |
| 126mm CLT no ceiling |
20mm Wolf Miwo 18mm Plywood |
68mm |
N/A | 46 | 49 | 61 (2) | 49 (-3 ; -8) | |
| 126mm CLT no ceiling |
Adhesive 5mm Plywood |
20mm |
N/A | 38 | 35 | 72 (-1) |
35 (0 ; -2 | |
| 140mm CLT no ceiling |
PhoneStar Tri x2 layers |
50mm |
N/A | 52 | 55 | 56 | 54 | |
| 148mm CLT no ceiling |
PhoneStar 25 PhoneStar Tri x2 layers |
75mm |
N/A | 56 | 59 | 52 | 58 | |
| 140mm CLT with drop ceiling |
PhoneStar Tri x2 layers |
50mm |
N/A | 64 | 70 | 40 | 71 | Ceiling Detail: 60mm timber battens, 25mm steel profiles with TPS spring clips, 40mm mineral wool, PhoneStar Tri, Plasterboard |
Acoustic test reports for all referenced results are available on request.
